Cleaning and care
60
Also use
the cleaning brush to clean
the milk pipework in the lid from the
top and bottom.
To reassemble the lid:
First inser
t the seal into the lid.
Make sure that you do not insert the
slanted end of the stainless steel
tube into the seal. This will damage
the seal.
Inser
t the milk intake tube into the
seal.
Bean container
P
ull the bean container out of the ap‐
pliance and pull the lid toward the
back and off.
Clean the bean container and its lid
by hand using
warm water and liquid
dish soap. Dry both components.
Slide the lid back on, then slide the
bean con
tainer back into the appli‐
ance.
To Next Page
Loading...
