Installation
92
The appliance comes with four M5
sock
et screws to help you align and se‐
cure it in the building-in niche.
Open the app
liance door, and partial‐
ly tighten the side socket screws.
C
arefully turn the lower socket
screws to center the machine in the
niche.
T
ighten both upper socket screws by
hand to secure the machine in the
unit. Do not over-tighten them.
Adjusting the door hinges
If the machine door becomes difficult to
ope
n or close after installation, you can
adjust the hinges to realign it (TX 20):
Tighten the screw to align it flush
with the cabinet front.
T
ighten the screw to align the door
horizontally and vertically.
To Next Page
Loading...
