Settings
55
TeaTimer
You can use the TeaTimer to start a
minute minder when making tea (see
“Making drinks – TeaTimer”).
Volume
You can set the volume of the audible
signal and keypad tones in the segment
bar.
Display
Brightness
The display brightness is adjusted via a
segment bar.
Colour scheme
Choose between a light or dark colour
scheme for the display.
QuickTouch
Use this setting to define whether the
sensor button and movement sensor
should respond when the coffee
machine is off and the time is being
shown in the display (Time| Display| On
or Night dimming).
Lighting
Use the segment bar to set the lighting
intensity.
You can use the sensor button to
switch the lighting on or off at any
time, provided that the coffee machine
is switched on.
If the coffee machine is switched off,
you can still switch the lighting on or
off whenever you like but you will need
to select the following settings first:
- Time| Display| On or Night dimming
(time of day is displayed)
- Display | QuickTouch | On
Info (display information)
In the Info menu option, you can display
the number of drinks dispensed and the
fill levels of the cartridges (provided that
they have been inserted).
Fresh water
The machine is intended to be plumbed
into the water supply. Fresh water is
automatically taken into the water
container when the fresh water
connection is on. If it is switched off,
you must fill the water container
manually.
Altitude
If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.
To Next Page
Loading...
Need help?
General
