Frequently Asked Questions
Faults with automatic cleaning and/or descaling
Problem Possible cause and solution
After switching on, a
message appears
informing you that
automatic cleaning
and/or descaling could
not be carried out.
The coffee machine was not ready for operation: all
removable parts, such as the water container, drip
tray, brew unit, and central spout, must be installed.
The water container was not filled with drinking water
at least up to the descaling symbol.
The appliance door was not closed.
Confirm the message withOK.
Make sure that the coffee machine is ready to use
before the next automatic cleaning and/or
descaling process.
The coffee machine was not switched off at the start
time.
The automatic maintenance programs will only start if
the coffee machine is switched off.
Confirm the message withOK.
Change the start time if necessary.
Descale appliance appears
even though a ready-to-
use descaling cartridge
has been inserted.
Drinks cannot be made.
Depending on the water hardness level in your area
and your usage behaviour, the coffee machine will
occasionally need to be descaled using the
maintenance program.
For this you will need to use a suitable descaling
agent, e.g., Miele Descaling Tablets.
Descale the coffee machine using the
maintenance program (see “Descaling the
appliance” in “Cleaning and care”).
99
To Next Page
Loading...
Need help?
General
