Cleaning and care
76
Wipe any coffee grounds from the
filters. One filter is located in the
funnel. The other filter can be found
to the left of the funnel.
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is made.
Cleaning the interior of the appliance
Use your vacuum cleaner to remove
dry ground coffee residues.
Clean the niche of the brew unit with
a damp, clean cloth. Clean the areas
marked in white in the illustration,
e.g., around the drive shaft,
especially well.
Replacing the brew unit
Proceed in the reverse order: push
the brew unit back into the coffee
machine. Tilt the brew unit forward a
little when doing this.
Press the button under the handle of
the brew unit and, while doing so,
turn the handle backward.
Useful tip: If you are unable to turn the
brew unit handle, apply firm pressure to
the sides of the brew unit.
Push the water container into the
coffee machine.
The process of removing and inserting
the brew unit causes ground coffee to
drop onto the drip tray.
Remove the drip tray and clean the
lid.
Push the drip tray back into the
coffee machine and close the door.
Cleaning the interior, inside of
the appliance door, and drip
tray
Clean the interior and front of the
appliance as part of the normal cleaning
process. For instance, if you remove the
To Next Page
Loading...
Need help?
General
