Cleaning and care
65
Cleaning the drip tray and
grounds container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
Clean the drip tray and grounds
container every day to avoid
unpleasant smells and mildew.
A prompt will appear in the display
when the drip tray and/or the grounds
container is full and needs to be
emptied. Empty the drip tray and the
grounds container. It is not necessary to
take the lid off the drip tray in order to
empty it.
Useful tip: If the drip tray is heavily
soiled, clean it with a brush before
placing it in the dishwasher.
Open the appliance door.
Remove the drip tray and grounds
container from the machine.
Empty the grounds container after
removing it from the drip tray.
The grounds container may contain a
small amount of water from rinsing as
well as the leftover coffee grounds.
Taking the drip tray apart
The orange clips are not removable.
Take the lid off the drip tray as
follows: press the orange clips
outward on both sides to release the
lid. Remove the lid.
To Next Page
Loading...
Need help?
General
