Cleaning and care
81
Pull the brew unit to the side first
and then pull out to the front. Tilt
the brew unit forward while doing
so.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
“Frequently Asked Questions”).
When you have removed the brew
unit, do not change the position of
the handle on the brew unit.
Otherwise the brew unit cannot be
reinserted.
Clean the brew unit by hand under
warm running water without using
cleaning agent or dish detergent.
Wipe any coffee grounds from the
filters. One filter is located in the
funnel and the other to the left of the
funnel.
The process of removing the brew unit
causes ground coffee to drop onto the
drip tray.
Remove the drip tray and clean the
lid.
Clean the interior of the coffee
machine (see also “Cleaning and care
– Removing the brew unit and
cleaning it by hand”). Use your
vacuum cleaner to remove dry
ground coffee residues.
To Next Page
Loading...
Need help?
General
