Miele DA 3668 - Setting Extraction or Recirculation Mode

Before using for the first time
17
Settings with the deflector
plate retracted
The cooker hood must be switched off
before activating settings. The
deflector plate must be retracted. In
order to reach the controls when the
deflector plate is retracted please note
the following:
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Select Extraction mode or
Recirculation mode
The cooker hood is suitable for both
extraction mode and recirculation
mode. The power of the fan is
adapted to suit the selected mode of
operation. The cooker hood is set up
ex-works for recirculation mode. It has
to be re-set for extraction mode.
To re-set it for extraction mode the
operating hours counter for the
charcoal filter(s) has to be deactivated.
 Switch off the fan and the lighting.
 Press the  control and the operating
hours control  at the same time.
The Charcoal filter symbol  and one
of the fan power levels will flash.
 Press and hold the  control until the
B indicator lights up.
 Confirm your choice with the
operating hours control .
All the indicator lights will go out.
Extraction mode has now been set.
If you don't confirm your selection
within 4minutes, the cooker hood will
automatically revert to the original
setting.