Installation
59
Take the grease filters out and
remove any protective foil. Replace
the grease filters.
Extraction mode
Insert the non-return flap, if required.
Make sure that it opens easily and
closes again by itself.
Attach the exhaust ducting, e.g.
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory). When using
125mm ducting, fit the reducing
collar supplied into the exhaust
socket (see “Connection for air
extraction”).
Attach the exhaust ducting to the
exhaust socket on the cooker hood.
See “Connection for air extraction”
for further instructions on fitting the
ducting.
To Next Page
Loading...
