Cleaning and care
45
Remote control
Cleaning the remote control
Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the
casing.
Changing the battery
Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one
3VCR2032 battery.
The battery must be changed if cooker
hood functions can no longer be
selected using the remote control. If the
control lamp on the remote control no
longer lights up or lights up only weakly
when a button is pressed, the battery is
exhausted.
Cooker hood functions can still be
selected using the controls on the
cooker hood.
Use a screwdriver to loosen the two
screws on the back and remove the
cover.
Remove the old battery and replace
with a new one. Make sure the
polarity is correct.
Refit the cover and secure with the
two screws.
To Next Page
Loading...
