Cleaning and care
37
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be re-set.
Whilst the fan is switched on, press
the Grease filter control for
approx. 3 seconds, until only the 1 is
flashing.
The Grease filter symbol goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
Touch the Grease filter control for
approx. 6 seconds, until only the 1 is
flashing.
Charcoal filters
Four charcoal filters must be fitted in
addition to the grease filters. These are
designed to absorb cooking odours.
The charcoal filters are fitted in the
canopy from above.
Fitting/replacing charcoal filters
Take the charcoal filters out of their
packaging.
Open the apertures for the charcoal
filters.
Insert the charcoal filters and close
the apertures up again.
To Next Page
Loading...
