Electrical connection
43
Electrical connection
All electrical work should be
undertaken by a suitably qualified
and competent electrician in strict
accordance with current national and
local safety and building code
regulations.
Please ensure the connection data
(voltage and frequency) quoted on the
data plate match the household mains
supply. Please consult a qualified
electrician if you are in any doubt.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
For extra safety it is advisable to
operate the appliance via a suitable
residual current device (RCD). Contact
a qualified electrician for advice.
Do not connect the appliance to the
mains electricity supply by a
multisocket adapter or an extension
lead. These are a fire hazard and do not
guarantee the required safety of the
appliance.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow .................................earth
Blue ............................................. neutral
Brown ................................................live
WARNING: THIS APPLIANCE MUST
BE EARTHED
To Next Page
Loading...
