EasyManuals Logo

Miele DAS 4920 User Manual

Miele DAS 4920
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Warning and Safety instructions
12
The appliance must not be connected to a chimney or flue which
is in use. Neither should it be connected to ducting which ventilates
rooms with fireplaces.
If exhaust air is to be extracted into a chimney or ventilation duct
no longer used for other purposes, seek professional advice.
Cleaning and care
There is a risk of fire if the cooker hood is not cleaned as
described in these operating instructions.
Do not use a steam cleaning appliance to clean this appliance.
The steam could reach electrical components and cause a short
circuit.
Accessories and spare parts
Only use genuine original Miele accessories and spare parts with
this appliance. Using accessories or spare parts from other
manufacturers will invalidate the warranty and Miele cannot accept
liability.
Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.
Miele will guarantee to supply functional spare parts for a
minimum of 10years and up to 15years following the
discontinuation of your vapour extraction unit.

Table of Contents

Other manuals for Miele DAS 4920

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele DAS 4920 and is the answer not in the manual?

Miele DAS 4920 Specifications

General IconGeneral
Pressure (Pa)484
Intensive speedYes
Number of speeds3
Type of extractionDucted/Recirculating
Noise level (low speed)37 dB
Maximum extraction power605 m³/h
Noise level (high speed)55 dB
Noise level (medium speed)47 dB
Maximum recirculating power585 m³/h
Minimum distance from gas hob650 mm
Noise level (intensive speed)66 dB
Fluid dynamic efficiency classA
Minimum distance from electric hob450 mm
Current10 A
Connected load90 W
AC input voltage230 V
AC input frequency50 Hz
Energy efficiency scaleA+++ to D
Annual energy consumption22.9 kWh
Bulb typeLED
Bulb power3 W
Illuminance300 lx
Number of bulbs1 bulb(s)
TypeBuilt-in
Cord length1.5 m
Product colorStainless steel
Built-in display-
Exhaust locationTop
Number of filters1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth273 mm
Width896 mm
Weight14000 g
Depth (max)423 mm
Height (max)436 mm

Related product manuals