Miele DAS 4920 - Signing out of WiFi

Before using for the first time
20
 Start the WiFi connection on your
WiFi router.
When successfully connected the 2 and
3 will light up constantly.
 Quit connection mode on the cooker
hood by pressing the Run-on
control.
The cooker hood can now be operated
via the app.
If the connection fails, you have
probably not connected WPS on your
router quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the Miele app.
Sign out of WiFi (reset to factory
settings)
To set up a new WiFi connection, the
existing WiFi connection must be
disconnected.
 Switch the cooker hood off.
 Press and hold the control.
 Touch the lighting control at the same
time.
With an existing WiFi connection, 2 and
3 will light up constantly.
The cooker hood will be ready for
disconnection in the next 2minutes.