Miele DAS 4920 - Altering Charcoal Filter Timer; Deactivating Power Management

Changing settings
31
Altering or deactivating the
charcoal filter operating hours
counter
Charcoal filters are needed for
recirculation mode.
You can set the operating hours counter
to suit the type of cooking you do.
It has to be deactivated for extraction
mode.
It is set at the factory for 180hours of
use before the filters need replacing.
 Switch off the fan and the lighting.
 Press the control and the operating
hours control at the same time.
The charcoal filter symbol and one of
the fan power levels will flash.
Fan power level indicators 1 to B show
the time set:
Indicator 1 ............................. 120hours
Indicator 2 ............................. 180hours
Indicator 3 ............................. 240hours
Indicator B.......................... deactivated
 Select the duration you want with
the or control.
 Confirm your choice with the
operating hours control.
All the indicator lights will go out.
If you do not confirm your selection
within 4minutes, the cooker hood will
automatically revert to the original
setting.
Deactivating power
management
Keep in mind that deactivating this
function may increase energy
consumption.
Activating/deactivating Power
Management
 Switch off the fan and the lighting.
 Press the fan run-on control for
approx. 10seconds until the indicator
for fan power level 1 lights up.
 Then press in turn:
- the lighting control,
- the  control, and then
- the lighting control.
If Power Management is activated, the
1 and B indicators light up constantly.
When it is deactivated, the 1 and B
indicators flash.
 Press the control to deactivate
Power Management.
The 1 and B indicators will flash.
 Press the control to activate Power
Management.
The 1 and B indicators will light up
constantly.
 Confirm the setting with the run-on
option control.
All the indicator lights will go out.
If you do not confirm your choice of
setting within 4minutes, the cooker
hood will revert to the old setting.