Miele DG 4050 - Adjusting Settings During Operation

Changing the settings during
operation
Changing the function
^
Turn the multi-function selector until
the function you are using is
highlighted and then press the
selector gently.
The display will change.
^
Select the function you want and
proceed as before.
Changing the temperature
^ Turn the multi-function selector until
the temperature you have already
selected is highlighted and then
press the selector gently.
^ Select the temperature you want, e.g.
80°C, and confirm your selection.
Altering the duration
^
Turn the multi-function selector until
the "Duration" in the bottom line of the
display is highlighted and confirm
this selection.
^
Turn the multi-function selector until
the "Duration" in the next line up of
the display is highlighted and confirm
this selection.
^
Select the duration you want you
want and confirm your selection.
Operation
33