Cleaning and care
146
Cleaning the side runners
The surfaces of the side runners
have been treated with PerfectClean.
Please see “PerfectClean” in
“Cleaning and care” for notes on
cleaning.
Risk of injury caused by hot
surfaces.
The steam oven gets hot during
operation. You could burn yourself
on the heating elements, oven
compartment or accessories.
Allow the heater elements, oven
compartment and accessories to
cool before removing the side
runners.
Pull the side runners out of the
holder(1.) from the front and remove
them(2.).
Remove:
– light soiling with a clean sponge and
a solution of washing-up liquid and
hot water,
– stubborn soiling with a clean
dishwashing sponge and a solution
of washing-up liquid and hot water.
You can use the abrasive side of the
dishwashing sponge if necessary.
After cleaning, wipe the surface with
clean water to remove any detergent
residues.
Then dry the side runners with a soft
cloth.
Reassemble by following these
instructions in reverse order.
Refit the side runners carefully.
If the side runners are not correctly
inserted, there is no anti-tip
protection. Also, the temperature
sensor could be damaged when
cooking containers are placed in the
steam oven.
To Next Page
Loading...
Need help?
General