Description of functions
30
Steam reduction
With steam cooking and combination
cooking, the steam reduction function
will switch on automatically at the end
of a cooking programme which uses a
temperature within a certain
temperature range. The function stops
excessive steam escaping when the
door is opened. Steam reduction will
appear in the display.
Steam reduction can be switched off
(see “Steam reduction” in the “Settings”
chapter). With steam reduction
switched off, a lot of steam will escape
when the door is opened.
Oven interior lighting
For energy-saving reasons, the oven
interior lighting has been set at the
factory to go out after the programme
has begun.
If you want it to stay on all the time the
oven is on, you will need to alter the
default setting (see “Settings –
Lighting”).
If the door is left open at the end of a
cooking programme, the oven interior
lighting will switch off automatically
after 5minutes.
The lighting can be switched on for
15seconds by touching the button
on the control panel.
To Next Page
Loading...
Need help?
General