Operation
29
Danger of injury caused by im-
plosion.
External glass containers can im-
plode during vacuum sealing.
Only vacuum seal vacuum-proof
containers made of plastic or stain-
less steel.
We recommend caso
®
vacuum-seal-
ing container sets if you wish to use
external containers. These containers
can be connected to the drawer us-
ing the vacuum adapter supplied.
Vacuum-sealing containers with a
capacity of 24 oz (700ml) can be
damaged during the vacuum-sealing
process.
Use only vacuum settings1 and 2
when vacuum sealing these contain-
ers.
Vacuuming sealing external
containers
The process for vacuum sealing a con-
tainer from the caso
®
vacuum-sealing
container set is described below.
Prepare the vacuum adapter:
Detach the container-lid connector
(smaller diameter) from the con-
tainer-set connecting tube.
Attach the connector to the end of
the vacuum-adapter tube. For a
secure grip, make sure that the end
of the tube is pushed at least
1/4" (0.5cm) over the opening on the
connector.
Fill the container to a maximum of 1
1/4" (3cm) below the rim.
To Next Page
Loading...