Aligning the Ice/Water
Dispenser
If necessary the depth of the Ice/Water
dispenser can be aligned from inside
the custom door cut-out. This allows the
dispenser to be aligned with the
custom door to achieve the best
possible appearance.
,
Disconnect the appliance from
the power supply.
^
Press the dispenser back and pull
downwards to remove.
^ Remove the cover and the plastic
grill.
^
Remove the screw from the rear
casing, then lift the tab on the drip
tray up and off.
Installing the appliance
71
To Next Page
Loading...
Need help?
General
