^
Adjust the custom door to adjacent
furniture/fixtures.
^
Align the custom door with the
double-threaded bolts.
^ Tighten the nuts on the adjusting rail.
This will correct the side alignment of
the door.
^ Put the side strips (15) back into
place and screw them completely
down on both sides of the appliance
door.
^ Align the custom door again as
needed and tighten all screws on the
sides.
Attaching the covers
^ To mount the cover strips on both
sides of the door, click them into
place from bottom to top, into the
gap between the appliance door and
the custom door.
^
Screw the brackets onto both sides
of the appliance, to hold the cover
strip.
Installing the appliance
70
To Next Page
Loading...
