^ Insert the cover strip into the space
between the appliance and the side
panel.
For side-by-side combinations, the
cover strips (on both sides of the
appliance) are applied to the
outermost spaces only.
^
Attach the light switch cover.
Attaching the toe-kick panel
The maximum height of the toe-kick
panel is 4" from the top of the floor.
Do not cover the ventilation slits in
the base panel. Risk of damage to
the appliance.
^ If required, cut the toe-kick panel to
the required length and height.
^
Attach the plinth to the appliance.
^
Put the included covering plate in
place.
^
Attach the toe-kick panel to the
plinth.
Installing the appliance
71
To Next Page
Loading...
