Miele G 890 - To Start a Program before the Delay Start Period Has Ended

Example of how delay times are
shown:
up to 59 minutes: 5 9
between 1 hour and
9 hours - 30 minutes
(example – 5 1/2 hours): 5. 3 0
above 10 hours: 1 5 h
The program will start automatically
when the countdown reaches “0” and
the “Delay start” lamp goes out. The
“Time left” lamp will light and the dis-
play will show the time left in the cur-
rent program.
To prevent the detergent from dis-
solving prematurely when using the
“Delay Start” feature, make certain
that the dispenser is dry before ad-
ding detergent.
To start a program before the Delay
Start period has ended:
Press and hold the “START/Stop” but-
ton (22) for at least one second.
The indicator lamps next to the Pro-
gram Selection Buttons and the deci-
mal point in the time display will light.
Select the desired program (17).
Select “Top solo” if desired.
Press the “START/Stop” button (22).
The indicator lamp next to the “START/
Stop” button will go out and the pro-
gram will begin.
Additional features
36