Under no circumstances should
sealant find its way between the
hob frame and the worktop.
This could cause difficulties if the hob
ever needs to be taken out for servic-
ing, (possibly leading to damage to
the frame and worktop). The sealing
strip under the edge of the top part
of the hob provides a sufficient seal
for the worktop.
Lightly position the hob. (The "Miele"
logo must be visible at the front).
Use both hands to press down on
each side of the hob until it clicks
into place.
When doing this take care that the
seal around the hob is lying on the
surface of the worktop on all sides.
This is important to ensure an effec-
tive seal on all sides.
The hob can now only be removed
with a special tool.
Installation - Ceramic hobs
72
To Next Page
Loading...
