The bottom oven is illustrated however
the procedure is generally the same for
the top oven. Any steps which differ are
described in detail.
To remove the oven door
Please note : the oven door is heavy.
It should be gripped firmly at the
sides when being removed or
re-fitted.
^ Open the door fully.
Before the door can be removed, the
door hinges need to be locked so
that they do not damage the door
when it is taken out.
^ Flip down the locking clamps on
each door hinge. This locks the
hinges.
^ Lift the door up until it is nearly in the
closed position. The hinges will
automatically swing out in this
position, then remove the door.
To re-fit the oven door
^ Hold the door as shown above and
carefully put the locked hinges into
the guide holes until they engage.
Open the door fully.
^ Still supporting the door flip the
locking clamps up.
It is essential that the locking clamps
are flipped up when the door is
re-fitted after cleaning. Otherwise on
closing the door, the hinges could
work loose from the guide holes and
this could result in damage to the
door.
Cleaning and care
44
To Next Page
Loading...
