^ Lift the front locating hole on to the
guide pin behind the collar.
^ Put the runners back into place.
To remove the back panel
– Bottom oven e
^ Loosen the screws in the back panel
and take it out.
The oven must not be used without
the back panel fitted. This could
lead to injuries.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
– Top oven -
^ Take the runners out of the oven.
^ Remove the interior back panel.
The back panel is only held in place by
the side runners.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
Cleaning and care
46
To Next Page
Loading...
