Microwave (Solo) η
56
Quick Guide
ĺ Turn on the oven.
ĺ Place the food in the oven.
ĺ Turn the mode selector to Microwave
(Solo) η.
The recommended power level ɘə will
appear in the display with ʹ flashing
under ʳ:
ə
ɘ
The following power levels can be
selected: ɜɟ, Ʌ, ɅɅ, ɅɅɅ, ɅɅɅɅ, ɘə.
ĺ Turn the mode selector to set the
microwave power level, if necessary.
ĺ Confirm with OK.
ɆɆɐɆɆ min will appear in the display with
ʹ flashing under ʒ:
ɉɆ
ʒ
Ɇ
ɐ
ə
PLQ
ĺ Use the rotary selector to select the
cooking duration (e.g. ɆəɐɉɆ minutes).
The maximum duration that can be set
depends on the power level selected.
ĺ Confirm with OK.
ɆəɐɉɆ min appears in the display with ʹ
flashing under Start:
ɉɆɆ
ɐ
ə
PLQ
6WDUW
ĺ Confirm with OK.
The magnetron, lighting and cooling fan
will come on and the cooking program
will start.
At the end of the cooking duration
– ɆɐɆɆ appears in the display,
– ʒ flashes,
– the cooling fan will continue to run,
– a buzzer will sound if turned on (see
"Settings - ɠɈ").
ĺ Turn the mode selector to .
ĺ Take the food out of the oven.
ĺ Turn the oven off.
If the dish is not cooked to your liking,
you can extend the cooking duration
by entering a new duration.