Miele H 818 - Oven Operation; Oven Controls and Indicators

Operation - oven
Temperature selector Oven function selector
Open out the inside cover of the
operating instructions before start¬
ing.
A control on the timer determines
whether the oven is controlled
manually or automatically, Check
that the control is set to the mode
you require. See the separate instruc¬
tions for detailed instructions on how
to use She firmer.
Light rings
The temperature control and the oven
selector switch are surrounded by light
rings which illuminate when a cooking
function has been selected. The light
ring around the temperature control
only lights up when the oven control
has been set to a function which
requires a temperature setting.
This light ring is graduated Irorrt while
to yellow for low temperature settings
to red for the highest setting If only the
temperature control Is turned, and not
the oven selector, neither ring lights
up.
The oven control light ring is pale yel
low and does not change colour.
Temperature control
The temperature control must only
be turned on In a clockwise direction
until a resistance is felt. Turn off anti¬
clockwise. It may be set at any tempe¬
rature between 50 °C and 275°C.
When the temperature control is
switched to the chosen temperature,
the indicator light above this switch
comes on, it will go out after the
required temperature is reached. It will
switch in again during cooking as the
heating element switches on to main
lain the temperature.