Cleaning and care
80
Stubborn soiling on the Flexi-
Clip runners
Never attempt to clean FlexiClip tele-
scopic runners in a dishwasher. This
would remove the special grease
which is essential for their smooth
functioning.
For stubborn surface soiling or if the
bearings become sticky with spilled fruit
juices proceed as follows:
Soak the FlexiClip runners for approx.
10minutes in a solution of hot water
and washing-up liquid.
If necessary use the back of a wash-
ing-up sponge to remove the soiling.
The bearings can be carefully cleaned
with a soft brush.
Cleaning may cause some discoloura-
tion or fading in places, however this
will not affect the functioning of the
runners in any way.
To Next Page
Loading...
