Electrical connection
99
Electrical connection: Other
countries
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with local and na-
tional safety regulations.
The voltage and rated load are given on
the data plate situated at the front of
the oven interior. Please ensure that
these match the household mains sup-
ply.
For extra safety it is advisable to install
a suitable residual current device
(RCD) / ground fault interrupter (GFI).
Contact a qualified electrician for ad-
vice.
If the cord is damaged a new cord must
be fitted by a Miele approved service
technician.
WARNING - THIS APPLIANCE
MUST BE EARTHED
To Next Page
Loading...
