One burst of steam takes approx.5-8
minutes. The number of bursts of steam
and when they are injected will depend
on the type of food being cooked:
–
Yeast mixtures will rise better if
steam is injected at the beginning of
the programme.
–
Bread and rolls also rise better if
exposed to steam at the start.
Injecting a burst of steam at the end
of the programme will give the bread
and rolls a glistening crust.
–
When roasting meat with a high fat
content injecting steam at the
beginning of roasting will help render
the fat.
Moisture plus is not suitable for
mixtures which contain a lot of
moisture, such as choux pastry and
meringues, as the addition of steam
does not allow them to dry out
sufficiently.
Tip: Please refer to the sample recipes.
Moisture plus function d
It is quite normal for condensation to
form on the inside of the door during
steam injection. This will dissipate
during the course of the cooking
programme.
^
Prepare the food and place in the
oven.
^
Fill a suitable container with the
quantity of water specified:
Aut§: approx. 150 ml
i: approx. 150 ml
2: approx. 200 ml
3: approx. 300 ml
^ Select Moisture plus d.
Moisture plus d
57
To Next Page
