Miele H6461B - Special Surface Treatments

PerfectClean treated surfaces
PerfectClean surfaces have very good
non-stick properties and are much
easier to keep clean than conventional
enamel surfaces, if cleaned regularly.
Food can be taken off these surfaces
easily, and soiling from baking and
roasting is simple to remove.
Food can be sliced or cut up on
PerfectClean surfaces.
However, do not use ceramic knives
as these will scratch the
PerfectClean surface.
Surfaces treated with PerfectClean
enamel can be cleaned as you would
clean glass.
Read the instructions in "Cleaning and
care" so that the benefits of the
non-stick properties and easy cleaning
are retained.
The following have all been treated with
PerfectClean:
–
Oven interior
–
Side runners
–
FlexiClip telescopic runners
–
Universal tray
–
Baking tray
–
Rack
–
Anti-splash insert
–
Perforated baking tray
– Round baking tray
Catalytic enamelled surfaces
The back panel, roof liner (if fitted) and
side liners (if fitted) are coated with
catalytic enamel. Soiling from oil and fat
is burnt off this surface when very high
temperatures are used in the oven.
See "Cleaning and care" for more
information.
Features
33