Miele H6461B - To Skip Residual Moisture Evaporation

At the end of the residual water
evaporation process "Process finished"
appears in the display.
A cooking process using the Moisture
plus function d or an Automatic
programme with moisture can now be
carried out.
During the evaporation process
moisture will condense on the door
and the oven interior.
This condensation must be wiped off
after the oven has cooled down.
To skip residual moisture
evaporation
,
Do not cancel the prompt for
residual moisture evaporation
unless you have to, as this could, in
certain circumstances, cause the
steam unit to overflow into the oven
interior when taking in more water.
^
Select the Moisture plus d function
or an Automatic programme that
uses moisture.
"Evaporate residual moisture?" will
appear.
^ Scroll through the list until "Skip" is
highlighted.
^ Touch the OK sensor.
A cooking process using the Moisture
plus function d or an Automatic
programme with moisture can now be
carried out.
Moisture plus d
65