Initial commissioning
33
General settings
The oven must not be operated
until it has been properly installed
within cabinetry.
The oven will turn on automatically
when it is connected to the power
supply.
Welcome screen
A welcome greeting is displayed. You
will then be asked to select some basic
settings which are needed before the
appliance can be used.
Follow the instructions on the display.
Setting the language
Select the desired language.
Confirm with OK.
Setting the country
Select the desired country.
Confirm with OK.
Setting the voltage (electrical
version)
The voltage set must match that
of the house as to not damage the
oven.
Confirm the voltage before setting. If
in doubt contact a qualified
technician.
Select the voltage.
Confirm with OK.
Setting the date
You can enter numbers by scrolling
through and touching the roller, or by
using the numerical keypad.
Set the day, month and year.
Confirm with OK.
To Next Page
Loading...
Need help?
General
