Miele HS23 - Operation; Starting and Stopping the Vacuum

Operation
24
Removing the vacuum cleaner
from the wall bracket
 Remove the vacuum cleaner from the
wall bracket by pulling it upwards.
Switching on and off
 If you have charged the battery dir-
ectly, pull the charging plug out of the
charging socket on the bottom on the
rear of the PowerUnit.
For the best possible cleaning results,
always start the ComfortClean self-
cleaning function before switching on
the vacuum cleaner (see “Cleaning and
care” – “Activating the ComfortClean
self-cleaning function”).
 Press the upper button on the
handle.
The vacuum cleaner will switch on using
the lowest power level.