Miele HS23 - Cleaning the fine dust filter

Cleaning and care
28
 Empty the dust container over a bin.
 Remove the pre-filter by pulling it
downwards.
 Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not clean the pre-filter with water.
Do not use pointed or sharp-edged
objects to clean the filter.
 Clean the dust container and pre-filter
with a dry cloth or with a cleaning tool
which is located on the side of the
PowerUnit.
 Reinsert the cleaned pre-filter into the
cleaned dust container as far as it will
go.
 Close the dust container flap, making
sure it clicks into place.
Cleaning the fine dust filter
Clean the fine dust filter thoroughly at
least once every 3months outside the
PowerUnit.
 Risk of damage caused by incor-
rect cleaning.
The fine dust filter can become dam-
aged and be less effective as a result.
Do not clean the fine dust filter with
water and avoid cleaning the inside.
Do not use pointed or sharp-edged
objects to clean the filter. Do not
brush the fine dust filter (not even
with the cleaning tool supplied).