Switching off and residual heat
indicators
To switch off a cooking zone:
^
Touch the sensor switch for the
relevant cooking zone twice.
A 0 flashes in the cooking zone display
for a few seconds. If the cooking zone
is still hot, the residual heat indicator
will then appear in the display.
To switch off the hob:
^ Touch the ON/OFF sensor s.
This switches off all cooking zones. The
residual heat indicator will appear in the
display of any cooking zone which is
still hot.
The lines of the residual heat indicator
go out one after another as the cooking
zones cool down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
Do not touch or place any
heat-sensitive objects on the
cooking zones while the residual
heat indicators are on.
Danger of burning and fire hazard.
If there is an interruption to the
power supply, the residual heat
indicators will flash on and off.
Operation
22
To Next Page
Loading...
Need help?
General
