Miele KM 6839 - Page 54

Problem solving guide
54
Problem Cause and remedy
An operating noise can
be heard after the
appliance has been
switched off.
The cooling fan runs until the hob has cooled down
and then switches off automatically.
 alternating with 
flashes in the timer
display and a buzzer
sounds.
The hob is incorrectly connected.
 Disconnect the hob from the mains electricity
supply.
 Call Miele Service. The hob must be connected to
the mains according to the wiring diagram.
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
Cooking zone fault
 Interrupt the power supply to the hob for approx. 1
minute.
 If the problem persists after power has been
restored, please contact Miele.
 flashes alternately
with numbers in the
timer display.

The overheating protection mechanism has been
activated.
 See “Safety features”.
,  or 
The fan is blocked or defective.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault code continues to appear in the
display, contact Miele Service.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the hob for approx.
1minute.
 If the problem persists after power has been
restored, please contact Miele Service.