Burners
The burners can be dismantled for
cleaning once they have cooled down.
Proceed as follows:
^
Take off all the removable parts of the
burner and wash in a solution of hot
water and washing-up liquid. Then
dry them all thoroughly. Make sure
that the flame slits are clean and
completely dry.
The surface of the burner cap will
gradually become more matt with time.
This is quite normal and will not affect
the operation of the hob.
^
Wipe the fixed parts of the burner
base with a damp cloth and dry
afterwards.
^
Gently wipe the ignitor and the
ignition safety device with a well
wrung-out cloth and wipe dry with a
clean cloth.
Cleaning and care
21
To Next Page
Loading...
Need help?
General
