Miele PDR 908 HP User Manual

Timer
37
The Delay start must be activated in
the Supervisor level so that the timer
can be selected.
Before the programme starts, the
Timer can be used to select a pro-
gramme start time or programme end
time.
Setting the timer
 Touch the  timersensor.
 Select the option Finish at, Start in or
Start at.
 Set the hours and the minutes with
the OKsensor.
Changing the timer
The selected delay start time period can
be changed before the programme start.
 Touch the ,  or sensor.
 If required, change the specified time
and confirm with the OKsensor.
Deleting the timer
The selected delay start period can be
cancelled before the programme starts.
 Touch the ,  or sensor.
The selected delay start period will ap-
pear in the display.
 Touch the Deletesensor.
 Confirm with the OKsensor.
The selected delay start period is de-
leted.
Starting the timer
 Touch the Start/Stopsensor.
The door will lock and the time until the
programme starts will appear in the dis-
play.
After the programme has started, the
selected delay start period can only be
changed by interrupting the pro-
gramme.
The programme can be started immedi-
ately at any time.
 Touch the Start immediatelysensor.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm