Miele PDR 908 HP User Manual

Fragrance flacon
52
Removing/replacing the fra-
grance flacon
 Turn the outer ring anti-clockwise un-
til the markers a and b line up.
 Replace the fragrance flacon with a
new one.
When not in use, you can store the fra-
grance flacon in its original packaging.
Fragrance flacons are available to order
from Miele or online.
The fragrance can leak out of the
flacon. Do not lay the fragrance
flacon down.
- If you are keeping the fragrance flacon
in its original packaging, do not store
the packaging upright on its edge or
upside down. Otherwise, the fra-
grance will leak out.
- Always store in a cool, dry place away
from direct sunlight.
- When purchasing new fragrance flac-
ons, only remove the protective seal
just before use.

Miele PDR 908 HP Specifications

General

Door hinge	Left
Drum volume	130 L
Control type	Touch
Loading type	Front-load
Product color	Stainless steel
Built-in display	Yes
Custom panel-ready	No
Appliance placement	Freestanding
Drying system	Heat pump
Drying capacity	8 kg
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	-
Maximum spin speed	- RPM
Noise level (drying)	- dB
Door opening angle	167 °
Current	10 A
Connected load	1440 W
Power plug type	Type F (CEE 7/4)
AC input voltage	220 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	777 mm
Width	605 mm
Height	850 mm
Weight	72000 g
Package depth	820 mm
Package width	660 mm
Package height	940 mm
Package weight	78000 g
Door opening diameter	370 mm