Miele PFD 101 U - Consumption (Ecofeedback)

Settings
101
Deleting the energy tariff times
You can delete the settings for an
energy tariff time and in doing so
deactivate the EcoStartoption for this
time zone.
 Use the sensor controls to select
an electricity tariff time T1–T3 that
you wish to delete and confirm with
OK.
 For example, select Delete T1 and
confirm with OK.
 For example, select Delete T1? and
confirm with OK.
The settings for the energy tariff time
selected will be reset.
 Confirm the message with OK.
The energy tariff time will be deleted.
Consumption (EcoFeedback)
You can set whether the water
consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme sequence and the
actual consumption after the end of the
programme.
In this menu you can also call up the
total consumption of water for all the
wash programmes you have previously
run on your dishwasher (see the
“EcoFeedback consumption display”
section in the “Caring for the
environment” chapter).
Displaying Consumption
 Select the Consumption display menu
option and confirm with OK.
 Select the setting you want and
confirm with OK.
Displaying Total consumption
 Select the Total consumption menu
option and confirm with OK.
 You can display the total
consumption via the Water menu
option.
You can reset the value for the total
consumption to 0.
 Select the Reset menu option and
confirm with OK.
 Select the Yes menu option and
confirm with OK.
 Confirm the message with OK.
The values are now reset to 0.