Operation
52
Switching off the dishwasher
The dishwasher can be switched off
at any time using the sensor
control.
You can also stop an ongoing timer by
switching off the dishwasher.
Switching the dishwasher off during a
programme stops the programme.
Confirm the query Switch appliance off
with OK.
If you have touched the sensor
control, but in fact do not wish to
cancel the programme, use the
button to select the Do not switch off
option on the display and confirm
with OK.
Risk of damage from leaking
water.
Water leakage can cause damage.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then
the upper basket and finally the 3D
MultiFlex tray (if present).
This will prevent water drops from the
upper basket and 3D MultiFlex tray
from falling onto the dishes in the
lower basket.
To Next Page
Loading...
