Dishwashers with a cutlery
tray (SC)
To make unloading much easier, cutle-
ry should be grouped in zones, one for
knives, one for forks, one for spoons,
etc.
Place the blades of knives and the
prongs of forks between the holders.
Spoons, on the other hand, should be
placed with the handles between the
holders.
Longer items such as soup ladles, cake
slices, mixing spoons and long knives
should be placed lengthwise in the in
-
dentation in the middle of the cutlery
tray.
The upper spray arm must not be
blocked by items which are too big
(e.g. cake slices).
The cutlery tray insert is removable.
Spoon heads should be placed in con
-
tact with at least one of the serrated re-
tainers on the base of the cutlery tray to
ensure that water runs off them freely.
If spoon handles do not fit between the
holders, place them the other way
round making sure that that head of the
spoon is in contact with the support on
the bottom of the tray.
Loading the dishwasher
31
To Next Page
Loading...
