Miele PG 8052 - Drying

How the Delay start time is shown in
the display:
–
up to 59 minutes:
e.g. 30 minutes = 30
–
between 1 hour and 9 hours 30 mi
-
nutes:
e.g. 5 hours = 5.00
–
10 hours and over:
e.g. 15 hours = 15^
,
To prevent children coming into
contact with dishwasher detergent
do not fill the detergent dispenser
until just before starting the pro
-
gramme, i.e. before pressing the
"Start" button and activate the child
safety lock.
When using the "Delay Start" functi-
on, make sure that the compartment
is dry before adding detergent.
Wipe dry with a cloth if necessary.
Starting a programme before the De
-
lay start period has elapsed:
A programme can be started before the
Delay start period has elapsed. Pro
-
ceed as follows:
^
Press the h/f button for at least one
second.
The d indicator light will go out.
Note:
If the "Drying" additional function had
been selected, then you will need to se
-
lect it again.
^
Press the Start/Stop button h/f.
The programme will begin.
The h/f and l indicator lights will
come on.
Drying
The "Drying" additional function can be
selected immediately after selecting the
programme. N.B. It cannot be selected
with the I COLD programme. The dry-
ing process is carried out by the built-in
turbothermic fan and depending on the
programme, additional heating which
switches on for 11 - 17 minutes. The to-
tal programme duration will increase
accordingly.
^ First select the programme you requi-
re.
^
Then press the +c button to select
the "Drying" additional function.
^
Press the Start/Stop button h/f to
start the programme and the "Drying"
additional function.
Operation
39