Switching on
^
Make sure the spray arms are not ob
-
structed.
^
Close the door.
^ Open the stopcock, if it is closed.
^ Press the On/Off button I-0.
The Start/Stop indicator light h/f will
flash.
The indicator light next to the last pro-
gramme selected will also come on.
Selecting a programme
Choose your programme according to
the type of load, and the degree of soi
-
ling.
The different programmes and their
uses are described in the programme
chart at the end of this booklet.
Starting a programme
^
Please refer to the programme chart
before selecting a programme.
^
Then use the programme selector
buttons %$ to select the program
-
me you wish to use.
The duration of the programme selec-
ted will appear in the display in hours
and minutes.
Use the % button to scroll down
through the programmes.
Use the $ button to scroll up through
the programmes.
The indicator light next to the program-
me selected will come on.
Operation
34
To Next Page
Loading...
