Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
and cleaned regularly (approx. every
4 - 6 months).
^
Switch the dishwasher off.
Remove the spray arms as follows:
^
Take out the cutlery tray (if your dish
-
washer is fitted with one).
^
Push the top spray arm upwards to
engage the inner ratchet. Then uns
-
crew the spray arm.
^
Push the middle spray arms upwards
a to engage the ratchet. Then uns
-
crew the spray arm b.
^
Remove the lower basket.
^ Pull the lower spray arm firmly up-
wards to remove it.
^
Use a pointed object to push food
particles into the spray arm jets.
^
Rinse thoroughly under running
water.
^
Replace the spray arms.
^
Check that the spray arms rotate
freely.
Cleaning and care
48
To Next Page
Loading...
