To clean the inside of the filter, the flap
must be opened:
^ Pull back the yellow clip to do this.
^ Rinse all parts under running water,
using a nylon brush if necessary.
^ Then close the flap so that the catch
engages.
^ Replace the filter combination so that
it lies flat in the base of the wash ca-
binet.
^ Then turn the handle clockwise to
lock the filter combination in place.
,
Take care when you are fitting
the filter combination that it is secu-
red in position correctly. Otherwise
coarse soil could get into the circu-
lation system and cause a blockage.
Cleaning and care
47
To Next Page
Loading...
