Note:
You can now select the "Delay start" d
or "Drying" +c additional functions if
wished (see "Additional functions").
^
Press the Start/Stop button h/f.
The programme will begin.
The Start/Stop indicator light h/f will
come on.
The indicator light next to the last pro
-
gramme selected will come on.
The sequence indicator light for the
current programme stage reached will
also come on.
Do not finish a programme prematu-
rely.
Important programme stages (e. g.
reactivating the water softener)
could be omitted.
Programme sequence
indicators
After a programme has been started,
the current stage of the programme is
indicated by the programme sequence
indicator lights.
The indicator light for the active pro
-
gramme stage lights up during the pro
-
gramme.
l Main wash / Rinses
+c Drying (additional function)
Display
The duration of the programme selec
-
ted appears in hours and minutes in the
display before the programme begins.
During the programme the time left until
the end of the programme is displayed.
The time displayed may vary with the
same programme. This is due to the
water inlet temperature at each intake.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The electronics continually update the
programme duration whilst the pro-
gramme is running as long as the door
is not opened (e.g. to add crockery or
cutlery). The temperature of the inco-
ming water and the amount of crockery
in the wash cabinet will affect the dura-
tion. The next time you select the same
programme the duration will show as
last calculated in the display.
Operation
35
To Next Page
Loading...
