Problem Possible cause Remedy
The dishes are not
clean.
The dishes were not loa
-
ded correctly. Dishes
were placed inside other
pieces, water could not
access all surfaces.
See notes in "Loading the
dishwasher".
The outlet of the water in
-
take pipe for the middle
spray arm was covered.
An insufficient amount of
water flowed into the
middle spray arm.
Make sure that dishes pla
-
ced in the rear section of
the upper basket do not
cover the opening.
The programme was not
powerful enough.
Select a more powerful
programme, see "Pro
-
gramme chart".
Not enough detergent
was dispensed.
Use more detergent, see
"Operation".
Tall items are blocking the
path of the spray arms.
Rearrange the items so
that the spray arms can
rotate freely.
The spray arm jets are
blocked.
Clean the spray arm jets,
see "Cleaning and Care".
The filter combination in
the base of the wash cabi
-
net is not clean or is not
correctly fitted.
This may cause the spray
arm jets to get blocked.
Clean and/or replace the
filter combination correct
-
ly. Clean the spray arm
jets, see "Cleaning and
Care".
The non-return valve is
open and blocked. Dirty
water has flowed back
into the wash cabinet.
Clean the drain pump and
the non-return valve, see
"Cleaning the drain pump
and non-return valve".
Problem solving guide
55
To Next Page
Loading...
